Dual Power Automatic Transfer Switch 80A Millisecond Switching Generator Changeover Switch AC110V

Feature: 1. MILLISECOND SWITCHING: When there is an abnormality in the normal power supply, the automatic transfer switch will switch in millisecond to the backup power supply to ensure the continuity of the power supply. 2. AUTO MANUAL MODE: This dual power transfer switch can be operated automatically or manually, which is isolated anti interference, reliable and stable. 3. STANDARD RAIL INSTALLATION: The power transfer switch adopts standard 35mm rail installation method, specially designed for PZ30 distribution box. 4. EXCELLENT MATERIAL: The changeover switch adopts flame retardant PC shell, with good insulation and heat resistance. Silver contact is anti aging, with excellent conductivity. 5. WIDELY USED: The power transfer switch can be used in various occasion where continuous power outages are not allowed, such as home, shopping mall, factory. Specification: Item Type: Dual Power Automatic Transfer Switch Material: PC, Silver Model: NLQ3 125 2P Rated Current le: 80A Insulation Voltage Ui: AC690V Rated Voltage Ue: AC110V Frequency: 50/60Hz Rated Control Voltage US: 110VAC 85% Us to 110% Us Grade: PC Grade Specification: 2P Service Life: Electrical: 2000 Times, Mechanical: 5000 Times Rated Short Circuit Current: 50kA Fuse: RT16 00 63A Rated Impulse Withstand Voltage: 8kV Auxiliary Circuit: Two Relays, Each With Two Sets Contact Capacity: AC110V 50HZ le=5y Touch Time: <50ms Operation Conversion Time: <50ms Return Time: <50ms Closing Time: <50ms Package List: 1 x Dual Power Automatic Transfer Switch Note: 1. The maximum ambient temperature shall not exceed 40℃, the minimum temperature shall not be less than ‑5℃, and the average temperature within 24 hours shall not exceed 35℃. 2. The altitude of the installation site should not exceed 2000m. 3. When the maximum temperature reaches 40℃, the relative humidity of the installation site should not exceed 50%. When the temperature is at the lowest temperature of ‑5℃ and the relative humidity is high, for example, at a temperature of 25℃, the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the surface of the product.