Product Info
Voltage: AC220-240V OR AC100-130V
Power: 80W Frequency: 50Hz/60Hz
Temperature Range: 180~500℃/356~932℉
Temperature Stability: ±5℃
Heating Type: Wmore Ceramics Element
Soldering Iron Tips: 900M-B1.2
Wire Length: 1.4m / 55.12in
Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in
Soldering Iron Weight: Approx.96g/3.4oz
Package Size: Approx. 254*55*35mm/10*2.2*1.4n
Package Weight: Approx. 139g / 4.9oz
Operation description
Press the (+) button once to increase 1 ℃; press and hold to increase
The temperature is continuous.
Press the (-) button once to decrease 1 ℃; press and hold to decrease
The temperature is continuous.
Temperature calibration:
After turning on the power for 60 seconds, put the tip of the soldering iron on the thermometer,
The amount of solder on the soldering iron tip is moderate; do the test
Good contact between solder joints and solder joints.
When the thermometer shows a stable temperature (about 2 seconds),
Write down the temperature.
Temperature Calibration:
1.After 60 seconds of power on, put the soldering tip on a thermometer,
and a moderate amount of solder on the soldering tip; make the test
point and the soldering tip have good touch.
2.When thermometer displays a stable temperature (about 2 seconds),
write down the temperature.
3.Move soldering iron away from thermometer;
press the (-) and (+) button at the same time to enter
temperature Calibration.
4.Input adjustment quantity. Adjustment quantity=set
temperature - measured temperature (see example)
5.Press the (-) and (+) at the same time to exit
temperature interface, finished.
Example 1, when setting temperature is 350℃ while
measured temperature is 342℃, the correction steps
are as follows:
a.press the (-) and (+) at the same time to enter
temperature correction interface.
b.press the "+" button till the LCD displays 8℃
c.press the (-) and (+) at the same time to exit
temperature correction interface
Example 2, when setting
temperature is 350℃ while
measured temperature is
330℃,the correction steps
are as follows:
a.press the (-) and (+)
at the same time to enter
temperature correction
interface.
b.press the (-) button till
the LCD displays -20℃
c.press the (-) and (+)
at the same time to exit
temperature correction
interface
Feature 1: Soldering iron
Feature 2: soldering iron for soldering 220v
Feature 3: Soldering iron electric
Feature 4: Tip for soldering iron
Feature 5: Soldering kit
Feature 6: electric tools
Feature 7: soldering
Feature 8: Electronic soldering iron
